Baseload

Model 1500B100

IES Models for Baseload and Cogeneration Applications - Performance Data

Baseload Applications Below

IES model No.	IES 600B	IES 1200B	IES 1500B	IES 3000B
Kawasaki Turbine Model No.	S2A-01	M1A-11A	M1A-13A	M1T-13A
Genset ISO Output kWe	663	1,235	1,480	2,950
Compressor - No. of Stages and Type	2 Certrifugal	2 Certrifugal	2 Certrifugal	2 Certrifugal
Turbine - No. of Stages and Type	3 Axial	3 Axial	3 Axial	3 Axial
Reduction Gearbox Type	Parallel Shaft	Epicyclic	Epicyclic	Parallel Shaft

Starter Type:

Standard - Pneumatic (Air)
Optional - Diesel Hydraulic or Electrohydraulic

Fuel:

Standard - Natural Gas
Optional - No. 2 Diesel Fuel Oil
Optional - Dual Fuel

TECHNICAL INFORMATION

IES model No.	IES 600B	IES 1200B	IES 1500B	IES 3000B
Gas Pressure to Fuel Valve KPag (psig)	1,324 (192)	1,350 (196)	1,350 (196)	1,350 (196)
Fuel Input GJ/hr (BTU/hr X 10⁶)	11.45 (10.85)	19.11 (18.11)	21.86 (20.71)	44.30 (41.99)
Fuel Gas Mass Flow kg/hr (lb/hr)	278.3 (614)	464.4 (1,024)	531.3 (1,171)	1,077.0 (2,374)
Gas Volume flow m³/min (scfm)	5.62 (199)	9.39 (331)	10.73 (379)	21.76 (768)
Liquid Mass Flow kg/hr (lb/hr)	267.5 (590)	446.5 (984)	510.6 (1,126)	1,035.0 (2,282)
Liquid Volume Flow litres/min (US gpm)	5.2 (1.39)	8.8 (2.32)	10.0 (2.65)	20.3 (5.37)
Heat Rate MJ/kWh (BTU/kWh)	17.26 (16,362)	15.47 (14,666)	14.80 (14,027)	14.85 (14,074)
Turbine Exhaust Gas Flow on Natural Gas kg/hr (lb/hr)	17,198 (37,915)	29,984 (66,104)	29,691 (65,458)	59,397 (130,947)
Exhaust Gas Temperature deg. C (deg. F)	495 (923)	459 (858)	518 (964)	518 (964)

SET WEIGHTS AND DIMENSIONS

IES model No.	IES 600B	IES 1200B	IES 1500B	IES 3000B
A. Open Skid Type, Engine/Gearbox and Generator 1) Length m (ft)	3.355 (11.0)	4.210 (13.8)	4.210 (13.8)	4.816 (15.8)
2) Width m (ft)	1.010 (3.3)	1.500 (4.9)	1.500 (4.9)	1.800 (5.9)
3) Height m (ft)	1.375 (4.5)	1.620 (5.3)	1.620 (5.3)	1.710 (5.6)
B. Fully Enclosed Type 1) Length m (ft)	3.995 (13.1)	5.490 (18.0)	5.490 (18.0)	5.795 (19.0)
2) Width m (ft)	2.200 (7.2)	2.410 (7.9)	2.410 (7.9)	2.440 (8.0)
3) Height m (ft)	2.288 (7.5)	2.410 (7.9)	2.410 (7.9)	2.440 (8.0)
Set Weights (Approximate)
A. Engine Only kg (lb)	1,300 (2,866)	3,400 (7,496)	3,400 (7,496)	6,200 (13,669)
B. Open Skid Type Engine/Gearbox and Generator kg (lb)	3,502 (7,720)	7,185 (15,840)	7,585 (16,722)	15,670 (34,546)
C. Fully Enclosed Type Generator Set kg (lb)	9,980 (22,000)	20,415 (45,000)	21,415 (47,212)	27,000 (59,525)

NOTES:

1. Turbine generator performance ratings are nominal based on ISO conditions: 15°C (59°F), 101.325 kPa (abs), (29.92 inHg (abs); or 14.696 psia, sea level, 60% relative humidity, no inlet or exhaust duct losses, LHV of fuel and no water or steam injection.

2. Liquid fuel lower heating value LHV 42.7984 MJ/kg (18,400 Btu/lb).

3. Gas fuel lower heating value LHV 33.9316 MJ/cubic metre (910.6966 Btu/scf).

4. 1 Btu = 1055.056 Joules (IST)

5. Above specifications are subject to change without notice

Please complete the Baseload Questionnaire so that we can have a better understanding of your application.

Information Request Form